Forge Motorsport | Car Fantasy

Products of Forge Motorsport

Forge Motorsport werd in 1996 opgericht met de simpele idealen van innovatie, slim ontwerp en productie tot de hoogste kwaliteit.

Forge motorsports heeft het grootste assortiment vervangende aftermarket-kleppen, intercoolers en actuators ter wereld ontwikkeld.

Gebruikmakend van een state-of-the-art eigen CNC-machinewerkplaats en een zeer bekwaam team van toegewijde ingenieurs en fabrikanten, levert Forge motorsports wereldwijd haar producten.

Met al deze kennis tot hun beschikking, zijn ze vereerd om de leidende namen en raceteams in de wereld van Motorsport te leveren, waaronder: F1, WRC, Rally X en Le Mans. Forge motorsports levert ook verschillende OEM-fabrikanten.

227 Products

ALLOY WASHER BOTTLE

fmwbsci

ALLOY WASHER BOTTLE Productomschrijving This part replaces the stock white plastic filler, blue lid and plastic tube that leads to the main washer bottle in the inner wing, as they look a little out of place in the engine bay. The filler is replaces by an aluminium spun bottle with a Forge cap, and the tube is replaced with our own silicon hose. This product will fit: VW Scirocco, Golf Mk5 (2004+) Mk6 (2009+), Jetta, Touran, Caddy and Eos Seat Leon/Leon 4 (2006+), Altea (2004+) and Toledo (2005+) Skoda Octavia (2004+) and Superb (2008+) Audi A3/S3 (2004+)

€ 141,24

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi black

FMINTA3TDi-black

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi black Productomschrijving For the A3 , with the 2.0 litre TDi engine, we can offer a sure way to improve on the charge air cooling, by using the Forge "TWINtercooler". Our ground breaking innovation, first proven on the 2 litre FSit engines, features our unique parallel intercooler configuration, which adds greater cooling efficiency throughout the entire RPM band, beyond that of a single intercooler setup, but without any perceived increase in turbo lag.

€ 1.006,84

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi blue

FMINTA3TDi

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi blue Productomschrijving For the A3 , with the 2.0 litre TDi engine, we can offer a sure way to improve on the charge air cooling, by using the Forge "TWINtercooler". Our ground breaking innovation, first proven on the 2 litre FSit engines, features our unique parallel intercooler configuration, which adds greater cooling efficiency throughout the entire RPM band, beyond that of a single intercooler setup, but without any perceived increase in turbo lag.

€ 1.006,84

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi red

FMINTA3TDi-red

AUDI A3 FRONT MOUNTING TWINTERCOOLER 2.0 TDi red Productomschrijving For the A3 , with the 2.0 litre TDi engine, we can offer a sure way to improve on the charge air cooling, by using the Forge "TWINtercooler". Our ground breaking innovation, first proven on the 2 litre FSit engines, features our unique parallel intercooler configuration, which adds greater cooling efficiency throughout the entire RPM band, beyond that of a single intercooler setup, but without any perceived increase in turbo lag.

€ 1.006,84

Audi RS3 (8V) Intercooler 2015-.. met ACC bracket en Forge bedrukking

FMINT4

Audi RS3 (8V) Intercooler 2015-.. met ACC bracket en Forge bedrukking Intercooler Forge Audi RS3 2015- met ACC bracket en Forge bedrukking Productomschrijving Following on from our very successful intercooler for the RS3 8P chassis, the Forge intercooler for the RS3 8V chassis builds on our reputation for delivering cores that offer real-world increases in power and temperature drops. Whilst the 8V chassis shares many components with the older 8P, the space available behind the bumper is a different shape and the crash bar has also changed. This required a whole new intercooler and crash bar setup for this latest chassis* The RS3 8V core is a huge 640x250x100 and of bar and plate design. This gives it a huge 55% more surface area than stock, and an even more impressive 94% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8P chassis, we supply a genuine Audi RS3 crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity. On the standard car we tested on, it made 362bhp completely stock (so largely in line with what Audi quote) with a peak intake temperature of 58 deg C. With just this intercooler fitted and no other modifications, the same car made 386bhp with a peak inlet temperature of 23 deg C, a gain of 24bhp and a drop of 35 deg C. Gains on mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on stage 1 mapped cars. The kit contains full instructions for installation, which should take around 3.5 hours, and a complete kit which includes everything needed. Look what our customers are saying about this product : 5 / 5 stars - “In short, this product does what it states!” Working with Litchfield and their Technical Partners (Forge) I have conducted extensive testing to support the development of Litchfield tuning packages for the Audi RS3 8V. Whilst the OEM intercooler is “OK”, very rapidly on repeated road and dyno Wide Open Throttle (WOT) sweeps, the air charge temps quickly rise to levels that impact performance (pulling ignition). To extract the full potential out of the tuning packages and increase repeatability of results and improve overall reliability, I turned to Forge and their upgraded front mount intercooler. Not one for just using a product because of “sales speak”, I extensively tested the Forge offering. The conclusion based on the data logging, mapping and final results was clear. Monitoring charge temps with back to back tests instantly showed us that the cooling efficiency with the Forge product was significantly better. Comparing OEM intercooler charge temps for the coolest first run, against the Forge intercooler on it’s third repeated back to back run (really pushing this comparison with heat soak), the Forge intercooler saw a drop of 18degs peak over the OEM unit (on it’s coolest run with no heat soak). Repeated runs on the OEM intercooler saw the difference widen even more by up to 34degs higher (peak) than the Forge intercooler. Repeated runs between the OEM and Forge intercooler (all completed on the same day) saw the following peak values: OEM - 60degs Forge - 26degs The Forge intercooler also held the lowest charge temperature for longer. This sounds all fine and dandy but what does all this mean in relation to performance? First off Litchfield was able to develop their ECU calibrations without needing to worry about charge temperatures impacting performance. The car spent many hours on the dyno and completed many back to back runs. Over 30 different calibrations were created and tested. Not once did Litchfield need to let the car cool down between runs. The end result was a solid and repeatable 450+bhp achieved with only their ECU calibration, Forge Intercooler and secondary cat removal. Recently (March 2017), the car at this level of modification (Litchfield Stage 2) achieved a stonking 11.5s @ 118+mph quarter mile run at Santa Pod. This is the quickest time that we are aware of in the UK, for an RS3 8V at this level of modification using normal pump fuel, no weight reduction and on stock tyres. The car also achieved the 60mph sprint in 3.2s, the 100mph sprint in 7.9s and 100-200kmh sprint in 8.9s on this same run. I look forward to seeing how the Forge intercooler will complement Stage 3 development. Watch this space!

€ 1.687,95

Blanking Plug 10mm

FMTB052K-10

Blanking Plug 10mm Maat: 10mm

€ 9,17

Blanking Plug 20mm

FMTB052K-20

Blanking Plug 20mm Maat: 20mm

€ 9,17

Blanking Plug 25mm

FMTB052K-25

Blanking Plug 25mm Maat: 25mm

€ 9,17

Blanking Plug 28mm

FMTB052K-28

Blanking Plug Maat: 28mm

€ 9,17

Blanking Plug 34mm

FMTB052K-34

Blanking Plug Maat: 34mm

€ 9,17

BLOW OFF ADAPTOR FOR VAG 1.4 LITRE TSi (Turbo / Supercharged)

FMDV14TSi

BLOW OFF ADAPTOR FOR VAG 1.4 LITRE TSi (Turbo / Supercharged) Productomschrijving Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 1.4 litre TSi Turbo / Supercharged Engine, we have developed an Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with complexities of this engine. This product is available in machined alloy finish only. Downloads Dv14tsi

€ 93,23

BLOW OFF ADAPTOR FOR VAG 2.0,1.8,1.4 LITRE Tsi/ FSTi (Turbo only

fmdvfsit

BLOW OFF ADAPTOR FOR VAG 2.0,1.8,1.4 LITRE Tsi/ FSTi (Turbo only) Productomschrijving Yet another first for the Volkswagen and Audi Tuning Market from Forge ! With the introduction of the VAG 2.0 litre FSi Turbo Engine, and the procurement of our own development/project car, we have developed a Patented Atmospheric Blow-Off Valve adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch ME9 engine management systems employed on the following vehicles: Audi A3 2.0T FSI Audi B7 A4 2.0T FSI Volkswagen MK5 Golf GTI/Jetta GLI 2.0T FSI. Downloads Fitting Instructions Fsit Valve

€ 93,23

BLOW OFF ADAPTOR FOR VAG 2.0,1.8,1.4 LITRE Tsi/ FSTi (Turbo only

FMDV14T

€ 93,23

Blow Off valve for VAG 1.2 TSI black

FMDV12VAG-b

Blow Off valve for VAG 1.2 TSI black Productomschrijving Yet another first for Forge Motorsport ! This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine as found in the SEAT Ibiza ( Mk5). As the engine does not have a diverter valve fitted as standard, this valve not only gives you an incredible loud sound when lifting off the throttle during gear changes, but will also improve the throttle response by reducing any lag, as it will help the turbocharger maintain its rotational speed ready for when you accelerate. The kit includes all necessary parts with a machined billet adaptor for connecting the the throttle body, blow off valve, silicone hose ( a range of colours are selectable in the options below ) and the vacuum hose and pressure sensor connector. All this and all at a great value price.

€ 286,32

Blow Off valve for VAG 1.2 TSI blue

FMDV12VAG-blue

Blow Off valve for VAG 1.2 TSI blue Productomschrijving Yet another first for Forge Motorsport ! This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine as found in the SEAT Ibiza ( Mk5). As the engine does not have a diverter valve fitted as standard, this valve not only gives you an incredible loud sound when lifting off the throttle during gear changes, but will also improve the throttle response by reducing any lag, as it will help the turbocharger maintain its rotational speed ready for when you accelerate. The kit includes all necessary parts with a machined billet adaptor for connecting the the throttle body, blow off valve, silicone hose ( a range of colours are selectable in the options below ) and the vacuum hose and pressure sensor connector. All this and all at a great value price.

€ 286,32

Blow Off valve for VAG 1.2 TSI Red

FMDV12VAG-red

Blow Off valve for VAG 1.2 TSI Red productomschrijving Yet another first for Forge Motorsport ! This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine as found in the SEAT Ibiza ( Mk5). As the engine does not have a diverter valve fitted as standard, this valve not only gives you an incredible loud sound when lifting off the throttle during gear changes, but will also improve the throttle response by reducing any lag, as it will help the turbocharger maintain its rotational speed ready for when you accelerate. The kit includes all necessary parts with a machined billet adaptor for connecting the the throttle body, blow off valve, silicone hose ( a range of colours are selectable in the options below ) and the vacuum hose and pressure sensor connector. All this and all at a great value price.

€ 286,32

Blow Off Valve for VAG TSI 1.4 Twincharged engines

FMDVATSI

Blow Off Valve for VAG TSI 1.4 Twincharged engines Productomschrijving This valve kit is for VAG vehicles equipped with the 1.4 Tsi twincharged ( supercharged and turbocharged ) engines that have the electronically controlled bypass valves ( 2 bolt fitting). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures of the OEM valve, that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. See Youtube: http://www.youtube.com/watch?v=ndxnOz-xxYs This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.

€ 303,93

Blow Off Valve kit for VAG 1.4T 1.8T 2.0T Engines

fmfsitat

Blow Off Valve kit for VAG 1.4T 1.8T 2.0T Engines Productomschrijving This Blow Off valve is for VAG vehicles equipped with the 1.8 2.0T FSI or TFSi engines that have the electronically controlled bypass valves. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles fitted with the earlier version of the OEM valve that operate in warmer climates, as a solution to the many failures of the diaphragm that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible. Downloads Fmfsitat2 Fmfsitat3

€ 303,93

BOOST GAUGE FITTING KIT FOR TSI ENGINES (2008 onwards)

fmbgfk2

BOOST GAUGE FITTING KIT FOR TSI ENGINES (2008 onwards) Productomschrijving For all those wishing to install a boost gauge to there 2.0 litre FSiT engines (suitable for the 2008 and newer models equipped with the new CCTA or CBFA 2.0 TSI/TFSI engine) We have a CNC inline take off, which is installed on to the inlet manifold, and allows up to three connections to be made if required. Downloads Fmbgfk2

€ 63,88

Boost sensor adaptor

FMBGFK3

Boost sensor adaptor Productomschrijving This adaptor palter installs between the boost sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge.

€ 59,96

BRAKE KIT 330 x 32mm DISCS 6 POT CALIPERS

FMSBKMK5

BRAKE KIT 330 x 32mm DISCS 6 POT CALIPERS Productomschrijving A Big Brake kit with 6 pot calipers and 330 x 32mm ventilated discs. The discs are drilled and grooved to remove braking residuals and maintain optimum performance. Included in the kit are braided brakes hoses, mountings, and high quality fast road pads. This kit is suitable for the VW Mk5 Golf / Audi A3/ VW Scirocco with 17 inch or larger wheels. For vehicles with 19" or larger wheels you may wish to consider our 356mm disc option - see kit FMBKMK5

€ 1.873,59

BRAKE KIT 356 x 32mm DISCS 6 POT CALIPERS

fmbkmk5

BRAKE KIT 356 x 32mm DISCS 6 POT CALIPERS Productomschrijving A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are drilled and grooved to remove braking residuals and maintain optimum performance. Included in the kit are braided brakes hoses, mountings, and high quality fast road pads. This kit is suitable for the VW Mk5 Golf / Audi A3/ VW Scirocco with 19 inch or larger wheels. For vehicles with 18" or smaller wheels please see our kit FMSBKMK5

€ 2.006,18

Dump Valve Retaining Cap

FMDVC111

Dump Valve Retaining Cap

€ 7,55

Dumpvalve Verenset Grote veer

FMDVTUN

Dumpvalve Verenset Grote veer Diverter/BOV Tuning Kit Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit. Your valve tuning kit you will find four springs and three spacers. The strongest spring is the red, followed by the blue, yellow and finally the green which is the weakest. The spacers enable you to fine tune the settings between two spring tensions if required. We normally supply our valves, unless requested differently, with a spring that will match the tension of the manufacturers original fitment valve. However, as many owners undertake tuning modifications some may wish to re-tune the valve characteristics to suit a given application. If you are finding that the valve is dumping more than required or you are loosing boost pressure it is normally an indication that a stronger spring is required. Conversely if the valve is failing to dump it may be necessary to install a weaker spring. If during this tuning of your valve you are faced for example with the red spring. Downloads Valve Tuning Kit

€ 33,88

Dumpvalve Verenset Kleine veer ( SITVR - DVSIT - DVVXR )

FMTVTUN

Dumpvalve Verenset Kleine veer ( SITVR - DVSIT - DVVXR ) Productomschrijving This kit contains a range of springs suitable for tuning either the FMDVFSIT, FMDVFSITVR, FMDVVXR valves. This kit can also be used in combination with our FMDVTUN spring kit for the tuning of our twin piston atmospheric blow off valves. This kit is not suitable for the FMDVSPLTR or FMDV001GTi. Four springs are included within the kit, coloured coded green,yellow,blue, red. Depepending on the supplied original fitment this represents an increase of 25,50,75 and 100%.

€ 34,21

ED30 2.0 FSiT DV TO INTAKE RETURN HOSE Blue

fmrlh

ED30 2.0 FSiT DV TO INTAKE RETURN HOSE BLUE Productomschrijving This silicone hose fits the Audi S3, TTS and Golf ED30 2.0 litre FSiT engines. It runs between the diverter valve ( located at the front of the engine) and the air intake ( rear of engine). This is available in red, blue or black. For the perfect installation please use stainless hose clamps (x2)

€ 74,95

EGR or Secondary Air System Blanking Plate

FMEGRBP

EGR or Secondary Air System Blanking Plate Productomschrijving Secondary air injection system and EGR system block off valve plate Manufactured from high quality aluminium and supplied with Viton O ring and stainless steel bolts. Fitting this plate allows for elimination of the entire secondary air injection and EGR system.

€ 31,88

FLOUROSILICONE TURBO HOSE 210 / 225 HP ENGINES

fm225th

FLOUROSILICONE TURBO HOSE 210 / 225 HP ENGINES Productomschrijving This hose fits directly to the turbo on the 1.8T 210 and 225 engines. It is made from high temperature resistant flourosilicone compound and nomex reinforced to withstand the high pressures that may be experienced on tuned engines. This is the perfect replacement for the OEM hose which has a history of premature failure. Available in Ocre colour only Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation.

€ 103,81

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES black

fm225tbh-black

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES Black Productomschrijving This breather hose is available in red, blue or black and is the perfect compliment to the other hoses we produce for the Audi TT, S3 and SEAT Leon Cupra R, with the 225/210hp 1.8T engines. As always we have engineered this to not only look good , but to improve on the original fitment. With a Fluorosilicone protective lining, to protect against oil degradation and discolouring, this hose will not let you down.

€ 33,29

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES BLUE

fm225tbh-blue

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES BLUE Productomschrijving This breather hose is available in red, blue or black and is the perfect compliment to the other hoses we produce for the Audi TT, S3 and SEAT Leon Cupra R, with the 225/210hp 1.8T engines. As always we have engineered this to not only look good , but to improve on the original fitment. With a Fluorosilicone protective lining, to protect against oil degradation and discolouring, this hose will not let you down.

€ 33,29

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES blue

fm225tbh

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES Blue Productomschrijving This breather hose is available in red, blue or black and is the perfect compliment to the other hoses we produce for the Audi TT, S3 and SEAT Leon Cupra R, with the 225/210hp 1.8T engines. As always we have engineered this to not only look good , but to improve on the original fitment. With a Fluorosilicone protective lining, to protect against oil degradation and discolouring, this hose will not let you down.

€ 33,29

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES Red

fm225tbh-red

FLUOROSILICONE BREATHER HOSE 225 HP BAM ENGINES Red Productomschrijving This breather hose is available in red, blue or black and is the perfect compliment to the other hoses we produce for the Audi TT, S3 and SEAT Leon Cupra R, with the 225/210hp 1.8T engines. As always we have engineered this to not only look good , but to improve on the original fitment. With a Fluorosilicone protective lining, to protect against oil degradation and discolouring, this hose will not let you down.

€ 33,29

Forge Gesloten Dumpvalve

FMDV008

Gesloten Forge Dumpvalve Introducing the all new FMDV008 - The best just got BETTER! This turbo recirculation valve is the result of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. Key Features: ● Greater flow rate than OEM Bosch Valve ● Faster response time due to revised design ● Fully serviceable ● Can be rebuilt to suit the boost pressures associated with different applications ● Available in Black for a "stealth" installation or in gunmetal finish. ● Unique compact design gives greater clearance for installing under engine covers ● Greater longevity with extended service interval ● Limited lifetime warranty

€ 198,44

FRONT MOUNTING INTERCOOLER KIT S3 1.8T

fmints3

FRONT MOUNTING INTERCOOLER KIT S3 1.8T Productomschrijving This intercooler kit is the perfect solution whether you are losing power on a modified S3 through high intake temperatures or simply wish to help the longevity of the mechanical components. Whilst the quality of the original two side mounting intercoolers is excellent on a standard car, you are pushing them beyond their design criteria with greater pressure and flow rates on a modified car. we have designed our Front Mounting Intercooler kit to give greater thermal reductions on those vehicles running a simple software upgrade to those with larger turbochargers. Downloads S3fmic

€ 1.355,90

Gesloten Dumpvalve 1.8T

FMD006

Gesloten Dumpvalve 1.8T Productomschrijving Dumpvalve voor bijvoorbeeld alle 1.8 Turbo motor ( Seat - VW - Skoda - Audi etc etc ) Downloads Valve Service 2

€ 170,57

HIGH CAPACITY PISTON VALVE with FITTING KIT FOR TT or RS3 (8P)

fmarsdv

HIGH CAPACITY PISTON VALVE with FITTING KIT FOR TT or RS3 Productomschrijving This valve kit was developed for those who have tuned, or plan to tune, their vehicles in excess of 450hp, as it was observed that cars over 450bhp were randomly getting errors from the stock solenoid valve not functioning. Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp, the stock valve couldn’t move the amount or volume of air it needed to , so the ECU was seeing too great a positive boost in the MAP readings between gearchanges and assuming the stock valve wasn’t functioning correctly. We looked closely at this issue and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. We decided that we would re-design and produce our own elbow, allowing a much larger dv port, which in turn would allow fitment of a larger valve, to take advantage of it. We also improved the internal flow of the elbow and removed restriction within the valve. With the engine management on this engine being MAP based rather than MAF based, which is unlike many other Audi engines, we have also incorporated the option into the kit of being able to run as a recirculation valve or with an atmospheric discharge / Blow off. We are pleased to say that this is now solves all issues that owners were experiencing. To download the installation instructions for this product. This kit is available in BLACK only Downloads Fmarsdvr

€ 607,32

Filter

Merken navigatie

Merken van A-Z